Questions? Call email Allied@michiganbrewersguild.org or phone 844-375-3755

Tools

• Thumbnail

  

  Title

  FoR 16mm Parting Tool Combo

  Description

  FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 16mm Diamond Toolholder.

  • Inverted blade design significantly reduces chance of jam-up and blade breakage
  • Minimal side overhang and no front overhang help maximize rigidity
  • Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
  • Lack of swarf on top of blade means coolant is free to get right in to cutting edge
  • Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
  • Simple to resharpen--only front face has to be ground.

  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $160.00

  Availability

  In Stock

  Order Code

  BC272PKG

  Add To Cart

• Thumbnail

  

  Title

  FoR 20mm Parting Tool Combo

  Description

  FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 20mm Diamond Toolholder.

  • Inverted blade design significantly reduces chance of jam-up and blade breakage
  • Minimal side overhang and no front overhang help maximize rigidity
  • Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
  • Lack of swarf on top of blade means coolant is free to get right in to cutting edge
  • Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
  • Simple to resharpen--only front face has to be ground.

  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $160.00

  Availability

  In Stock

  Order Code

  BC285PKG

  Add To Cart

• Thumbnail

  

  Title

  FoR 8mm Parting Tool Combo

  Description

  FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 8mm Diamond Toolholder.

  • Inverted blade design significantly reduces chance of jam-up and blade breakage
  • Minimal side overhang and no front overhang help maximize rigidity
  • Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
  • Lack of swarf on top of blade means coolant is free to get right in to cutting edge
  • Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
  • Simple to resharpen--only front face has to be ground.

  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $150.00

  Availability

  In Stock

  Order Code

  BC236PKG

  Add To Cart

• Thumbnail

  

  Title

  FoR 9.5mm Parting Tool Combo

  Description

  FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 9.5mm Diamond Toolholder.

  • Inverted blade design significantly reduces chance of jam-up and blade breakage
  • Minimal side overhang and no front overhang help maximize rigidity
  • Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
  • Lack of swarf on top of blade means coolant is free to get right in to cutting edge
  • Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
  • Simple to resharpen--only front face has to be ground.

  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $150.00

  Availability

  In Stock

  Order Code

  BC235PKG

  Add To Cart

• Thumbnail

  

  Title

  Crobalt Cutoff Blade for FoR Parting Tool

  Description

  FoR holder takes common 1/2" x 3/32" tapered type parting blade. Beveled top and bottom to lock securely into a holder.
  The FoR Parting Tool Holder does not include a blade in the purchase, but these are widely available from several manufacturers and many suppliers worldwide. The blade is easily sharpened on any bench grinder and instructions for setting up, sharpening, and tips for best results, are included with the holder.
  Blades are double bevel for use in Brown and Sharpe type holders. Can be used in either a right or left hand holder.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $70.00

  Availability

  In Stock

  Order Code

  BC210

  Add To Cart

• Thumbnail

  

  Title

  Crobalt Solid Round Bit 3/16"x1-1/2" L

  Description

  These Crobalt tips are 3/16" x 1-1/2" with round ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
  Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
  Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
  They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
  The lathe is a 1960s Colchester Chipmaster.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $14.00

  Availability

  In Stock

  Order Code

  BC239

  Add To Cart

• Thumbnail

  

  Title

  Crobalt Square Bit 3/16"x1-1/2" L

  Description

  Crobalt cast alloy is an alternative tool bit to the 3/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
  Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 3/16" square.
  They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
  The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $14.00

  Availability

  In Stock

  Order Code

  BC227

  Add To Cart

• Thumbnail

  

  Title

  FoR 16mm Parting Tool

  Description

  The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
  For lathes with a screw on chuck the holder must be used with a rear tool post.
  Parting blade not included.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $105.00

  Availability

  In Stock

  Order Code

  BC271

  Add To Cart

• Thumbnail

  

  Title

  FoR 20mm Parting Tool

  Description

  The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
  For lathes with a screw on chuck the holder must be used with a rear tool post.
  Parting blade not included.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $105.00

  Availability

  In Stock

  Order Code

  BC284

  Add To Cart

• Thumbnail

  

  Title

  FoR 8mm Parting Tool

  Description

  The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
  For lathes with a screw on chuck the holder must be used with a rear tool post.
  Parting blade not included.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $95.00

  Availability

  In Stock

  Order Code

  BC230

  Add To Cart

• Thumbnail

  

  Title

  FoR 9.5mm Parting Tool

  Description

  The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
  For lathes with a screw on chuck the holder must be used with a rear tool post.
  Parting blade not included.
  Features/Tips
  If backordered, shipping may take 2 to 3 weeks. 

  Price

  $95.00

  Availability

  In Stock

  Order Code

  BC269

  Add To Cart

* = Membership prices are for North American shipments. Click on item to review non-North American destination prices. Actual price for non-North American will be computed at checkout.