Digital Machinist « Metalworking « Michigan Brewers Guild Enthusiast

Questions? Call email Allied@michiganbrewersguild.org or phone 844-375-3755

Digital Machinist

Subscriptions and Back Issues available in print and digital format.
Select preferred format after adding to your cart.

Filter Results:

page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... 16 »

Thumbnail

Title

FoR 16mm Parting Tool Combo

Description
FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 16mm Diamond Toolholder.
- Inverted blade design significantly reduces chance of jam-up and blade breakage
- Minimal side overhang and no front overhang help maximize rigidity
- Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
- Lack of swarf on top of blade means coolant is free to get right in to cutting edge
- Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
- Simple to resharpen--only front face has to be ground.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price

$160.00

Availability

In Stock

Order Code

BC272PKG
Thumbnail

Title

FoR 20mm Parting Tool Combo

Description
FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 20mm Diamond Toolholder.
- Inverted blade design significantly reduces chance of jam-up and blade breakage
- Minimal side overhang and no front overhang help maximize rigidity
- Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
- Lack of swarf on top of blade means coolant is free to get right in to cutting edge
- Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
- Simple to resharpen--only front face has to be ground.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price

$160.00

Availability

In Stock

Order Code

BC285PKG
Thumbnail

Title

FoR 8mm Parting Tool Combo

Description
FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 8mm Diamond Toolholder.
- Inverted blade design significantly reduces chance of jam-up and blade breakage
- Minimal side overhang and no front overhang help maximize rigidity
- Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
- Lack of swarf on top of blade means coolant is free to get right in to cutting edge
- Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
- Simple to resharpen--only front face has to be ground.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price

$150.00

Availability

In Stock

Order Code

BC236PKG
Thumbnail

Title

FoR 9.5mm Parting Tool Combo

Description
FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 9.5mm Diamond Toolholder.
- Inverted blade design significantly reduces chance of jam-up and blade breakage
- Minimal side overhang and no front overhang help maximize rigidity
- Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
- Lack of swarf on top of blade means coolant is free to get right in to cutting edge
- Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
- Simple to resharpen--only front face has to be ground.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price

$150.00

Availability

In Stock

Order Code

BC235PKG
Thumbnail

Title

Steam & Stirling Set

Description

Get all four Steam & Stirling books at a discounted price! Flex your metalworking skills on such engine projects as a no-casting 1.5 x 1.5V steam engine, a walking-beam Stirling-cycle mill engine, an epicyclic steam engine, and seventeen more -- and enjoy two bonus sections that offer hobby-expanding related topics. Please refer to the individual book ad for number of pages and further details; all are hardbound.
Book 1, Book 2, Book 3, Book 4

Price

$155.00

Availability

In Stock

Order Code

SS_PKG
Thumbnail

Title

Steam Shovels: A Model Builder's Plan Book

Description

NEW TITLE!
A unique collection of full-scale measured drawings for seven excavators from the Golden Age of steam powered shovels. Full details of each machine are shown, including the internals of all steam engines, gearing, boilers, controls, and steering. The 3D CAD generated plans are suitable for scaling to any size for both display and working live steam models. Also included are chapters explaining in detail how steam shovels move, and how boilers and steam engines function. All plans are based on measurements of surviving machines, original factory blueprints and repair manuals, plus patent documentation of mechanisms. Options are shown for versions with traction wheels, rail trucks, and crawler tracks where they were available. The shovels included in this book encompass the range of sizes from small rotating shovels to huge railroad shovels:
Marion Model 28, Marion Model 37, Erie Type B, Thew Type O, Thew Horizontal Crowd, Bucyrus 65-Ton, Marion Model 91.
Spiral Bound, 208 pages

Price

$39.95

Availability

In Stock

Order Code

CRSS
Thumbnail

Title

Building the Rio Grande K-27 Volume 2

Description

Volume 2 will conclude the building of Kozo Hiraoka's K-27, and also covers tools, transporting the model, and tips on operation. This book, longer than the first volume, contains a large supplementary section that includes many previously unpublished drawings and new text that describes the engineering that goes into designing a successful live steam locomotive.

Price

$69.95

Availability

In Stock

Order Code

K27V2
Thumbnail

Title

Building the Rio Grande K-27 Volume 1

Description

Over 400 pages chock-full of drawings, color photos and detailed text. Hardcover book is based on long-running serial in Live Steam & Outdoor Railroading magazine, but layout is all-new with foldouts for larger drawings. Features material not included in magazine articles. Volume 1 contains first 27 chapters. Volume 2 to be released after serial concludes in magazine.

Price

$69.95

Availability

In Stock

Order Code

K27
Thumbnail

Title

Shop Made Tools 2013

Description

If you've ever spent time with an experienced machinist, you no doubt had "Why didn't I think of that?" moments. Years of machining result in an arsenal of tricks and tools, but why wait? With over 100 entries from a number of authors, Shop Made Tools 2013 has something your shop needs, whatever your level of expertise! Compiled from popular thread on The Home Shop Machinist and Machinist's Workshop bulletin board, it contains entries featuring items for lathe and mill, work holding, and more. 64 pages.

Price

$9.95

Availability

In Stock

Order Code

SMT
Thumbnail

Title

Kozo's Building the New Shay

Description

1920s prototype locomotive engineering in 3/4" scale (with instructions for scaling up to 1-1/2"). Fifth in a fabulous series.
Hardbound. 275 pages.

Price

$59.95

Availability

In Stock

Order Code

NEWSH
Thumbnail

Title

Rudy's Model Steam Tractor

Description

Rudy's Model Steam Tractor will reprint, for what we believe to be the first time, Rudy's Case-style traction engine project that was originally published in Popular Mechanics magazine. The drawings in this book were hand drawn by Rudy himself, and have been only gently enhanced using a modern CAD program, allowing them to retain their original craftsman's touch.
Spiralbound. 80 pages.

Price

$24.95

Availability

In Stock

Order Code

MST
Thumbnail

Title

The Complete Mini-Lathe Workshop

Description

BACK IN STOCK!
Turn your mini-lathe into a workhorse, with dozens of improvements and projects designed to broaden its capabilities. In this must-have, 132 page, spiral-bound book, we've assembled and updated material from "Additions and Modifications to Mini-Lathe" column in The Home Shop Machinist magazine. With projects only requiring a drill press and lathe, you don't need to complete an entire shop to get started.

Price

$28.00

Availability

In Stock

Order Code

CML
Thumbnail

Title

The Machinist's Second Bedside Reader

Description
The Machinist's Second Bedside Reader takes up where basic texts on machine shop practice leave off. It tells you, in a comfortable, easy-reading style, many old and obscure tricks of the trade; helps you get things done better, faster, and easier in your shop; shows you how to make a number of useful shop tools, and introduces you to areas of metalworking you many never have thought of before.
Like the first book, the Second Bedside Reader is filled with more hints, tips, and projects. It contains full plans for:
- an elegant between-centers boring bar
- a poor man's jig borer
- an overhead drive for your milling spindle
- a toolpost fixture for rounding the ends of small parts
- a fixture for cutting multiple-start threads
- a simple shop-made sine bar and sine fixture for your milling machine
- ..... and much more!
  Also included in full is "The Bullseye Mixture," Guy's story about precision metalworking, rifle making, friendship, and the recipe for case hardening that may not be the only Bullseye Mixture in life.
  Paperback, 277pages.
Price

$44.99

Availability

In Stock

Order Code

MBRV2
Thumbnail

Title

6 Projects for the Shaper DVD

Description

In this DVD, Rudy describes and demonstrates how to make a tapered soft jaw for your vise, a pair of V-blocks, cut dovetail slides, external or internal keyseats and learn how to index and cut spur gears. Drawings, charts and outline included.

Price

$39.95

Availability

In Stock

Order Code

BC80
Thumbnail

Title

A Guide to Renovating the Bridgeport "2J" Varia...

Description

If you are planning on refurbishing your Bridgeport Series 1 "2J" or "2J2" Mill or if you are out in the market looking for a good used Bridgeport, then this manual is a great place to start. " A Guide to Renovating the Bridgeport 2J Variable Speed Milling Machine " ; this 152 page soft-cover shop manual, is fully illustrated with over 400 B&W photographs and diagrams, plus step-by-step instructions for disassembling, cleaning, reassembling and adjusting all of the critical components of the variable speed 2J milling machine.
Softbound. 152 pages.

Price

$38.95

Availability

In Stock

Order Code

RBP2JMM

Filter Results:

page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... 16 »