Machinist's Workshop « Metalworking « Michigan Brewers Guild Enthusiast

Questions? Call email Allied@michiganbrewersguild.org or phone 844-375-3755

Machinist's Workshop

Filter Results:

page: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... 19 »

Thumbnail

Title

Crobalt Square Bit 3/16"x1-1/2" L

Description

Crobalt cast alloy is an alternative tool bit to the 3/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 3/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

Price

$14.00

Availability

In Stock

Order Code

BC227
Thumbnail

Title

Drilling, Reaming, Tapping and Milling on the D...

Description

Drilling, Reaming, Tapping and Milling on the Drill Press. Many people sell the drill press short when it comes to machining. Rudy demonstrates many operations that make it a very important part of your shop.
Watch a brief clip from the DVD.

Price

$35.95

Availability

In Stock

Order Code

BC74
Thumbnail

Title

Falk No. 01 Locomotive - PRICE RECENTLY REDUCED

Description

In a series originally offered by Live Steam Magazine, the very popular 1-1/2" scale Elk River Mill & Lumber Company Falk logging engine continues to captivate builders.
Softbound. 64 pages.

Price

$12.95

Availability

In Stock

Order Code

FALK
Thumbnail

Title

Figure It Out - Common Sense and a Calculator DVD

Description

Did you ever wonder how high the valves should lift; what happens when you scale it up or down; how big the inlet passage should be; why small engines run so fast; how heavy it will be; how the flywheel effect changes with size; how to set your lathe for greater accuracy; or how to check tapers and angles? Rudy describes and illustrates his real world approach to problem solving on these and other subjects in the shop and at the drawing board. He includes an outline and drawings of examples used in the DVD presentation.
Watch a brief clip from the DVD.

Price

$35.95

Availability

In Stock

Order Code

BC75
Thumbnail

Title

FoR 16mm Parting Tool

Description

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

Price

$105.00

Availability

In Stock

Order Code

BC271
Thumbnail

Title

FoR 20mm Parting Tool

Description

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

Price

$105.00

Availability

In Stock

Order Code

BC284
Thumbnail

Title

FoR 8mm Parting Tool

Description

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

Price

$95.00

Availability

In Stock

Order Code

BC230
Thumbnail

Title

FoR 9.5mm Parting Tool

Description

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

Price

$95.00

Availability

In Stock

Order Code

BC269
Thumbnail

Title

Fundamentals of Machine Lathe Operation DVD

Description

Rudy thoroughly covers the basics of facing, boring and turning on the lathe. Included are plans and directions for a project to practice your skills. He demonstrates on his 1933 9" South Bend lathe. Rudy Kouhoupt has been the premiere teacher of machining for novice machinists everywhere. His seven books and 17 machining DVDs are perfect examples of his knowledge and skills.1 hour, 35 minutes.

Price

$44.95

Availability

In Stock

Order Code

BC70
Thumbnail

Title

Fundamentals of Milling Machine Operation DVD

Description

The basics of milling on a vertical milling machine are covered. Included are a printed outline, plans and directions for a project to practice your new skills -- an excellent fly cutter. 2 hours.

Price

$44.95

Availability

In Stock

Order Code

BC62
Thumbnail

Title

Generators and Inverters

Description

Steve Chastain's newest book give you the guidance to design and build your own power plant. It's the most complete small generator reference and go-to book available. Everything you need to know about building or buying small power plants. This book answers a slew of questions about generating your own electricity.
Now in Hardcover.

Price

$34.95

Availability

In Stock

Order Code

BC98
Thumbnail

Title

Grinding lathe Tools DVD

Description

Rudy discusses lathe cutting tools in depth and then describes how each would be ground properly for optimum metal cutting. Also included are plans to build a grinding table that will increase your accuracy when grinding your lathe tools. For those of you using the Diamond Toolholder, Rudy goes into great detail about grinding the toolbit for it. 1 hour 45 minutes.

Price

$39.95

Availability

In Stock

Order Code

BC66
Thumbnail

Title

Hot Bluing Firearms DVD

Description

The chemical and mechanical processes of hot bluing steel are described by Steve. He then demonstrates the procedures with the best quality equipment and materials. He also describes how you can blue your firearms on a limited budget. Learn to apply a professional finish to your firearms and restore the beauty of your old ones. See a layout used by professionals for profitable bluing and excellent results. Equipment, alternate heat sources and safety concerns are discussed in detail. 1 hour 10 minutes.

Price

$49.95

Availability

In Stock

Order Code

BC92
Thumbnail

Title

How to Cut Screw Threads DVD

Description

Screw Thread forms, and parts, cutting calculations and techniques for cutting threads on the lathe are described and demonstrated. Printed charts and tables are included with this machining DVD. 1 hour.

Price

$35.95

Availability

In Stock

Order Code

BC64
Thumbnail

Title

How to Cut Spur Gears DVD

Description

Using just a small mill and your lathe, you can learn how to cut your own spur gears. Terms and techniques are all covered. Charts and tables are included. 45 minutes.
Watch a brief clip from the DVD.

Price

$35.95

Availability

In Stock

Order Code

BC65

Filter Results:

page: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ... 19 »